In most ancient equipment, there are a large number of linear guide sliders. This is based on the principle that the slider can move back and forth vividly in the linear guide. It is true that the overall activity track is fixed, and there will be lubricating oil, but because of the different use environment, the slider itself will have a certain life problem. Therefore, if the linear guide slider is damaged, is it maintenance or direct replacement?

1、滑塊重要會呈現哪些問題

1. What are the main problems

因為設備、環境等存在著較大的差別性，也不能說滑塊在利用進程中一定會呈現雷同或類似的故障，但大體上可能把這些故障或問題進行分成兩個局部，一是滑塊電機元件局部，二是導軌局部。在滑塊電機元件中，存在著馬達、彈簧、齒輪等多種小整機，很輕易呈現問題；在導軌局部上比方可能會因為生銹、變形等造成故障。

Because there are great differences in equipment and environment, it can not be said that the slider will present the same or similar faults in the process of using, but generally these faults or problems may be divided into two parts, one is the slider motor component part, the other is the guide rail part. In the slider motor components, there are motor, spring, gear and other small machine, it is easy to present problems; in the rail part, for example, it may cause failure due to rust, deformation and so on.

2、是抉擇維修還是換新

2. Choice of maintenance or replacement

個別來說，因為大多數滑塊體積不大，各種整機都是集成式的裝置在里面，所以假如是其中的某一個或多少個整機呈現問題的話，到維修點可能維修，但假如是要害性的整機，可能維修的用度跟換新的差未幾了。在大多數情況下，假如導軌不問題，可能直接調換新的滑塊，簡單便利，用度也不會太高。

Individually, because most of the sliders are small in size, and all kinds of complete machines are integrated devices inside, if one or more of them have problems, they may be repaired at the maintenance point. However, if they are critical complete machines, the cost of maintenance may be as good as that of replacement. In most cases, if the guide is not a problem, may directly replace the new slider, simple and convenient, the cost will not be too high.

3、假如換新，滑塊高嗎

3. If change new, is slider price high

用于不同設備的滑塊，在上也有著較大的差別，比方用于注塑機上的滑塊基本上10－20元就可能搞定，而對雕刻機上的滑塊的就十分高了

For example, the price of the slider used in the injection molding machine is 10-20 yuan, while the price of the slider used in the engraving machine is very high