As a metal material, the guide rail is easy to rust, and it is difficult to maintain after rust, so what should we do? The following are some tips about the rust maintenance of guide rail, hoping to provide you with reference.

1、讓停機時刻大幅度的縮短，使直線鐵軌時刻處在行進與勞作的狀態下，通過提高使用頻率與效率來防止生銹。

1. The shutdown time can be greatly shortened, so that the linear rail is in the state of travel and work at all times, and rust can be prevented by improving the use frequency and efficiency.

2、如果能夠嚴格的控制直線導軌的純量那就再好不過了，只要純量在規定范圍之內，使用周期一般都是比較長的。同時如果能夠減少噪聲對直線導軌的干擾。

2. If we can strictly control the purity of the linear guide rail, it would be better. As long as the purity is within the specified range, the service cycle is generally relatively long. At the same time, if the interference of noise to the linear guide rail can be reduced.

3、在高速環境下工作的時候，要盡量讓電機溫升速度降低，也不要讓電機出現甩油的情況，如果能使功耗下降，給予電機保護那就再好不過了。

3. When working in a high-speed environment, try to reduce the temperature rise speed of the motor, and don't let the motor throw oil. If you can reduce the power consumption and protect the motor, it's best.

4、如果想對其進行清潔的話，那么拆下來的組件就要盡量的分類開來，因?yàn)榍鍧嵅煌慕M件有細清潔與粗清潔的不同方式，同時還要注意，不要將直線導軌離散的放在容器內，要先用金屬網作為緩沖，這樣可以使組件不接觸容器內不干凈的物質。

4. If you want to clean it, the disassembled components should be classified as far as possible, because different components can be cleaned in different ways of fine cleaning and coarse cleaning. At the same time, pay attention not to put the linear guide rail discretely in the container, but use the metal mesh as a buffer first, so that the components will not contact the unclean substances in the container.

5、如果是在低溫下工作，那么如果能夠提前保證直線導軌啟動的靈性和工作的靈性就非常好了，同時還要在低溫環境下盡量使輸出功率在小的程度上維持。

5. If you work at low temperature, it would be very good if you can ensure the starting spirit and working spirit of the linear guide rail in advance. At the same time, try to maintain the output power to a small extent in the low temperature environment.

6、使用的時候要盡量保持環境干凈，如果周圍能夠做到干凈清潔，讓細小的灰塵不進入直線導軌附近的空間，那么就能在很大程度上降低磨損概率，還能減少震動及噪聲?？傊?，直線導軌的養護需要耐心與堅持，做到上述幾點就能很好的防止生銹，也能更好的起到養護效果。

6. When using, try to keep the environment clean. If the surroundings can be clean and clean so that small dust does not enter the space near the linear guide rail, the wear probability can be reduced to a great extent, and vibration and noise can be reduced. In short, the maintenance of linear guide rail needs patience and persistence. The above points can not only prevent rust, but also play a better maintenance effect.