新聞中心
滾動軸承發熱的原因及其排除方法
來源：http://www.idczc.com/ 日期：2022-07-16 發布人：
(1)原因:軸承精度低方法:選用規定精度等級的軸承。
(1) Reason: low bearing accuracy method: select the bearing with the specified accuracy grade.
(2)原因:主軸彎曲或箱體孔不同心方法:修復主軸或箱體。
(2) Cause: the spindle is bent or the box hole is not concentric method: repair the spindle or box.
(3)原因:皮帶過緊方法:調整皮帶使松緊適當。
(3) Cause: the belt is too tight method: adjust the belt to make it properly tight.
(4)原因:潤滑不良方法:選用規定牌號的潤滑材料并適當清潔。
(4) Cause: poor lubrication method: select the specified brand of lubricating materials and clean them properly.
(5)原因:裝配質量低方法:提高裝配質量。
(5) Cause: low assembly quality method: improve assembly quality.
(6)原因:軸承內外殼跑圈方法：更換軸承及相關磨損部件。
(6) Cause: the inner shell of the bearing runs. Method: replace the bearing and related worn parts.
(7)軸向力太大方法：清洗、調正密封口環間隙要求0.2～0.3mm之間,更正葉輪平衡孔直徑及校驗靜平衡值。
(7) Method of excessive axial force: clean and adjust the clearance of the seal ring between 0.2 ~ 0.3mm, correct the diameter of the impeller balance hole and verify the static balance value.
(8)軸承損壞方法：更換軸承。
(8) Bearing damage method: replace the bearing.
以上就是為大家介紹的有關導軌絲杠的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.idczc.com
The above is a detailed introduction about the guide screw for you. I hope it will help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://www.idczc.com
