Synchronous belt module guide: the working principle of belt drive actuator is the same as that of conveyor belt system. The belt drive converts rotational motion into linear motion through a timing belt connected between two annular pulleys. The timing belt is usually made of fiber reinforced elastic material. Omer, but many other belt materials are available for more demanding applications. The belt includes teeth connected to the rotor pulley to effectively transmit torque and prevent slipping. The belt drive is enclosed in the aluminum body, and the slider is located at the top. The drive shaft interface is usually perpendicular to the side of the actuator.

滾珠絲杠驅動執行機構：滾珠絲杠驅動執行機構背后的基本原理實質上是對絲杠驅動系統的改進。滾珠絲杠驅動執行機構中，滾珠絲杠的旋轉驅動滾珠螺母/安裝支架，因?yàn)榻涌谑锹葜蜐L珠絲杠之間基本上是一個滾珠軸承系統，螺母中的硬化鋼球沿著螺柱的滾道滾動。與皮帶驅動執行機構類似，滾珠絲杠驅動執行機構的驅動部件封閉在鋁體內，而機架在頂部移動。與皮帶驅動執行器不同，驅動軸接口與滾珠絲杠對齊，位于執行器末端。

Ball screw drive actuator: the basic principle behind the ball screw drive actuator is actually an improvement of the screw drive system. In the ball screw drive actuator, the rotation of the ball screw drives the ball nut / mounting bracket, because the interface is basically a ball bearing system between the stud and the ball screw, and the hardened steel balls in the nut roll along the raceway of the stud. Similar to the belt driven actuator, the driving parts of the ball screw drive actuator are enclosed in the aluminum body, while the rack moves on the top. Unlike belt driven actuators, the drive shaft interface is aligned with the ball screw and located at the end of the actuator.

各自的優勢和局限性：

Respective advantages and limitations:

對于需要長行程的應用，通常皮帶驅動模組導軌機構，這比使用類似長度的滾珠絲杠驅動執行機構更具成本效益。MJUNIT邁捷關鍵運動部件，從而減少勞動密集型維護。盡管如此，為了確保扭矩的正確傳遞，皮帶的適當張力關重要，通常需要在定期維護期間重新張緊皮帶。

For applications requiring long travel, the belt drive module guide mechanism is usually preferred, which is more cost-effective than using a similar length of ball screw drive actuator. Mjunit is the key moving part of maijie, thus reducing labor-intensive maintenance. Nevertheless, in order to ensure the correct transmission of torque, the proper tension of the belt is critical, and it is often necessary to re tension the belt during regular maintenance.

或者，滾珠絲杠裝置與滾動滾珠軸承系統非常相似，因此能夠承載更高的負載并獲得更高的推力。因此，滾珠絲杠驅動執行機構在可能需要定位大型、重型負載的應用中是理想的。達到高精度。根據具體的執行機構設計，可能需要定期潤滑滾珠絲杠。

Alternatively, the ball screw device is very similar to the rolling ball bearing system, so it can carry higher loads and obtain higher thrust. Therefore, ball screw drive actuators are ideal for applications where large, heavy loads may need to be positioned. Achieving high accuracy. Depending on the specific actuator design, it may be necessary to lubricate the ball screw regularly.

滾珠絲杠

Ball screw

兩種執行器類型之間的進一步比較揭示了皮帶驅動執行器的其他缺點，盡管其簡單和。對于更高的負載/推力需求，需要更厚的皮帶。皮帶也容易受到?jīng)_擊負載的影響，盡管這一問題可能是通過對皮帶材料的精心選擇，在一定程度上減輕了皮帶的彈性，增加了強度。另外，由于皮帶容易伸長，滾珠絲杠執行機構的定位精度往往優于皮帶驅動執行機構。正因?yàn)槿绱?，滾珠絲杠驅動執行機構更適合于在長時間內要求高可靠性和重復性的應用。滾珠絲杠驅動執行機構是高加速度和高推力要求的，因?yàn)樵谶@種重復要求下，皮帶傳動皮帶輪很容易在轉子處滑動。

Further comparison between the two actuator types reveals other disadvantages of belt driven actuators, although they are simple and efficient. For higher load / thrust requirements, thicker belts are required. The belt is also vulnerable to impact load, although this problem may be caused by careful selection of belt materials, which reduces the elasticity of the belt and increases the strength to a certain extent. In addition, because the belt is easy to extend, the positioning accuracy of the ball screw actuator is often better than that of the belt drive actuator. Because of this, the ball screw drive actuator is more suitable for applications requiring high reliability and repeatability for a long time. Ball screw drive actuators are the first choice for high acceleration and high thrust requirements, because under such repeated requirements, the belt drive pulley is easy to slide at the rotor.

綜上所述，滾珠絲杠驅動執行機構在需要高負載和/或推力以及高精度定位的應用中是更好的選擇。然而，由于其和簡單，對于負載較低的應用，尤其是需要更高速度的應用，皮帶驅動執行機構仍然是更好的選擇。對于長行程應用，皮帶驅動執行機構也可以是一種經濟有效的解決方案。盡管在皮帶驅動和滾珠絲杠驅動的機械執行機構之間進行選擇的任務可能令人望而生畏。乍一看，每個設計的優點和缺點為每個獨特的應用提供了明確的選擇。

In conclusion, the ball screw drive actuator is a better choice in applications requiring high load and / or thrust and high-precision positioning. However, due to its high efficiency and simplicity, belt driven actuators are still a better choice for low load applications, especially those requiring higher speeds. Belt driven actuators can also be a cost-effective solution for long travel applications. Although the task of selecting between belt driven and ball screw driven mechanical actuators may be daunting. At first glance, the advantages and disadvantages of each design provide a clear choice for each unique application.

以上就是為大家介紹的有關導軌絲杠的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.idczc.com

The above is the detailed introduction of the guide rail lead screw. I hope it will help you. If you have any questions, please contact us. We will provide you with services in a professional manner http://www.idczc.com