新聞中心
裝卸直線導軌過程中有哪些注意事項
來源：http://www.idczc.com/ 日期：2022-11-14 發布人：
一、直線導軌的上端及側部都是塑料的零件組成的，在裝卸時我們應該注意不能用過硬的東西錘擊，裝卸成功后在測試運行時，不可以有其他的硬件物體對其猛烈撞擊，如果造成導軌的塑料物件裂開的話，導軌內的滾珠會滾出來，當然滑塊也會隨之脫落。二、導軌的清洗工作也很重要，一般導軌出廠之前都是有注射過潤滑劑的，要是想對導軌再次清洗的話，一點要讓導軌先晾干再可以加潤滑劑，導軌是不可以在沒有潤滑劑的情況下工作。
1、 The upper end and side of the linear guide rail are made of plastic parts. During loading and unloading, we should pay attention not to hammer with hard objects. After loading and unloading, during the test run, no other hardware objects can hit it violently. If the plastic objects of the guide rail are cracked, the ball in the guide rail will roll out, and of course, the slider will fall off. 2、 The cleaning of the guide rail is also very important. Generally, the guide rail has been injected with lubricant before leaving the factory. If you want to clean the guide rail again, let the guide rail dry before adding lubricant. The guide rail cannot work without lubricant.
三、對于不熟悉直線導軌的工作人員來說，一定要注意不可以隨便裝卸導軌的的任何零件，一方面是怕造成導軌的度和靈活度，也不能對導軌肆意安裝滾珠。
3、 For the staff who are not familiar with the linear guide rail, they must pay attention not to load and unload any parts of the guide rail at will. On the one hand, they are afraid of causing the flexibility and flexibility of the guide rail, and they should not arbitrarily install balls on the guide rail.
四、一點對于導軌上的滑塊也不可以隨意裝卸，若有需要要裝卸的話，也應先將導軌的輔助零件對正，再對導軌進行裝卸
4、 The slider on the guide rail cannot be loaded and unloaded at will. If it is necessary to load and unload, the auxiliary parts of the guide rail shall be aligned first, and then the guide rail shall be loaded and unloaded
以上就是為大家介紹的有關導軌絲杠的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.idczc.com
The above is a detailed introduction to the guide screw, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://www.idczc.com
