新聞中心
滾珠絲杠支撐座在使用中注意事項
來源：http://www.idczc.com/ 日期：2023-01-29 發布人：
絲桿支撐座具有結構簡單，拆裝方便，安裝允許偏差大，在使用過程中既要注意絲桿，也要需要注意支撐座，下面導軌絲杠廠家跟大家分享下滾珠絲杠支撐座在使用中注意事項：
The screw rod support seat has simple structure, convenient disassembly and assembly, and large allowable installation deviation. Pay attention to both the screw rod and the support seat in the process of use. The guide screw manufacturer will share with you the precautions for the use of the lower ball screw support seat:
1、安裝和使用中保持支撐座的清潔是為了防止粉塵和雜物的進入，必要時，還也好采取一定的防護措施。
1. The purpose of keeping the support seat clean during installation and use is to prevent dust and sundries from entering. If necessary, certain protective measures can also be taken.
2、安裝到絲桿時務必要小心保護密封圈唇部，密封圈唇部很容易受到破損和變形。
2. When installing the screw rod, it is necessary to carefully protect the sealing ring lip, which is easily damaged and deformed.
3、TBI滾珠絲杠支撐座已注入了適量的潤滑脂，在沒有使用之前不需要另加潤滑脂，也為了避免浪費。
3. The TBI ball screw support seat has been injected with proper amount of grease. It is not necessary to add additional grease before use, and it is also to avoid waste.
4、軸向鎖緊螺母的徑向鎖緊螺釘要在安裝確認完畢后給以鎖緊，必要時，加注螺絲以防松膠固定。
4. The radial locking screw of the axial locking nut shall be locked after the installation is confirmed. If necessary, the screw shall be filled to prevent loosening.
絲桿支撐座是考慮了安裝周圍空間的、小體積的設計。同時，裝入了經過調整預壓的軸承，交貨后就可直接進行裝配，既降低了裝配工時，又可提高裝配精度。關注我們http://www.idczc.com，了解更多事項！
The screw rod support seat is a small volume design considering the space around the installation. At the same time, the adjusted preloaded bearing is installed, and can be directly assembled after delivery, which not only reduces the assembly time, but also improves the assembly accuracy. Follow us http://www.idczc.com , learn more!
