新聞中心
高精度滾珠絲杠的保養方法
來源：http://www.idczc.com/ 日期：2023-06-17 發布人：
高精度滾珠絲杠是由導軌、絲杠和螺母組成的，絲杠和螺母之間通過滾珠傳動實現轉動。在滾珠的作用下，絲杠和螺母之間的摩擦力得到了大大的降低，從而使高精度滾珠絲杠具有高精度、高速度、高負載能力等特點。下面導軌絲杠廠家來講講高精度滾珠絲杠的保養方法。
The high-precision ball screw is composed of a guide rail, a lead screw, and a nut, and the rotation between the lead screw and the nut is achieved through ball transmission. Under the action of the ball, the friction force between the screw and the nut is greatly reduced, resulting in high-precision ball screws with characteristics such as high precision, high speed, and high load capacity. Below, the guide rail screw manufacturer will talk about the maintenance methods of high-precision ball screws.
1、定期檢查
1. Regular inspection
高精度滾珠絲杠在使用過程中需要定期檢查，檢查內容包括：
High precision ball screws require regular inspection during use, including:
(1) 檢查導軌和絲杠的表面是否有劃痕或損傷；
(1) Check the surface of the guide rail and screw for scratches or damage;
(2) 檢查滾珠的狀態是否正常，是否存在磨損或缺失；
(2) Check whether the ball is in normal condition, worn or missing;
(3) 檢查螺母的狀態是否正常，是否存在磨損或變形等現象。
(3) Check whether the nut is in normal condition and whether there is wear or deformation.
定期檢查可以及時發現高精度滾珠絲杠的問題，防止出現嚴重的故障。
Regular inspections can promptly identify problems with high-precision ball screws and prevent serious malfunctions.
2、清洗和潤滑
2. Cleaning and lubrication
高精度滾珠絲杠的清洗和潤滑是非常重要的保養措施。在清洗和潤滑時應注意以下幾點：
The cleaning and lubrication of high-precision ball screws are very important maintenance measures. The following points should be noted during cleaning and lubrication:
(1) 清洗時使用無紡布或棉布擦拭，不要使用含有酸堿等腐蝕性物質的清潔劑，以免損壞部件；
(1) When cleaning, use non-woven cloth or cotton cloth to wipe, do not use detergent containing Corrosive substance such as acid and alkali, so as not to damage parts;
(2) 潤滑時應使用高質量的潤滑脂，根據使用條件和環境選擇適當?shù)臐櫥?/div>
(2) When lubricating, high-quality lubricating grease should be used, and appropriate lubricating grease should be selected according to the usage conditions and environment;
(3) 潤滑時應注意潤滑脂的用量，過多或過少都會影響高精度滾珠絲杠的性能；
(3) When lubricating, attention should be paid to the amount of lubricating grease, as too much or too little can affect the performance of high-precision ball screws;
(4) 潤滑脂應定期更換，避免過期或變質。
(4) Lubricating grease should be replaced regularly to avoid expiration or deterioration.
3、避免超載和長時間空載運行
3. Avoid overloading and long-term no-load operation
高精度滾珠絲杠在使用時需要注意避免超載和長時間空載運行，因為這會導致高精度滾珠絲杠的壽命縮短或者出現故障。
When using high-precision ball screws, it is necessary to pay attention to avoiding overloading and long-term no-load operation, as this can shorten the lifespan of high-precision ball screws or cause malfunctions.
4、避免振動和沖擊
4. Avoiding vibration and shock
振動和沖擊是高精度滾珠絲杠易受到的影響，會導致滾珠、絲杠、螺母等部件的損壞或磨損。因此，在使用高精度滾珠絲杠時，應該盡量避免振動和沖擊。
Vibration and impact are easily affected by high-precision ball screws, which can cause damage or wear to components such as balls, screws, and nuts. Therefore, when using high-precision ball screws, vibration and impact should be avoided as much as possible.
在高精度滾珠絲杠沒有使用時，應該進行妥善的儲存和保護。一般來說，應該將高精度滾珠絲杠放置在干燥、清潔、無灰塵的地方，避免陽光直射和雨水浸泡。在儲存時，應該將高精度滾珠絲杠用塑料袋包裝好，避免灰塵和腐蝕物質的侵蝕。更多相關事項就來我們網站http://www.idczc.com咨詢吧！
When high-precision ball screws are not in use, they should be properly stored and protected. Generally speaking, high-precision ball screws should be placed in a dry, clean, and dust-free place, avoiding direct sunlight and rainwater immersion. When storing, high-precision ball screws should be packaged in plastic bags to avoid erosion by dust and corrosive substances. For more related matters, come to our website http://www.idczc.com Consult!
導軌絲杠：從設計結構...<>
大型絲杠的性能設計介...<>
梯形絲杠和滾珠絲杠的...<>- 滾珠絲桿目前的行業的...<>
- 滾珠絲杠螺母油封更換...<>
相關：
聯系我們
聯系人：王經理
手機：13153168609
地址：山東省德州市齊河縣經濟開發區齊眾大道
濟南共潤科技有限責任公司