導軌絲杠使用時需注意以下要點：

　　Attention should be paid to the following points when using guide screw:

　　防止異物侵入：避免切屑、冷卻液等異物進入，可能導致破損，使用時應配備伸縮護罩或防護罩

　　Prevent foreign objects from entering: Avoid foreign objects such as chips and coolant from entering, which may cause damage. When using, a retractable cover or protective cover should be equipped

　　正確安裝：注意安裝部品和安裝精度，支撐部和螺母出現偏心或偏移將縮短使用壽命

　　Correct installation: Pay attention to the installation components and installation accuracy. Eccentricity or offset of the support parts and nuts will shorten the service life

　　配置導向部件：使用梯形絲杠時，應配置LM滾動導軌等導向部件，否則可能導致破損

　　Configure guiding components: When using a trapezoidal lead screw, LM rolling guide rails and other guiding components should be configured, otherwise it may cause damage

　　操作：避免掉落或敲擊，可能導致劃傷、破損，接觸時應使用防護用具

　　Safe operation: Avoid falling or knocking, which may cause scratches or damage. Protective equipment should be used when in contact

　　清潔與潤滑：清潔導軌絲杠表面油污，用油脂槍注油，確保油膜均勻

　　Cleaning and lubrication: Clean the oil stains on the surface of the guide screw, use a grease gun to inject oil, and ensure that the oil film is uniform

　　專用工具：安裝時使用木制、橡膠或輕金屬制品工具，避免使用易產生碎片的工具

　　Special tools: Use wooden, rubber, or light metal tools during installation to avoid using tools that are prone to producing fragments

　　遵循以上注意事項，可以確保導軌絲杠的正常運行和延長使用壽命。

　　Following the above precautions can ensure the normal operation and prolong the service life of the guide screw.

　　本文由導軌絲杠提供幫助，更多的相關內容請點擊：http://www.idczc.com希望本文能夠?yàn)槟鷰韼椭?，感謝您的閱讀！

　　This article is assisted by the guide screw. For more related content, please click: http://www.idczc.com I hope this article can be helpful to you. Thank you for reading!